WJD-0.6 underground electric scooptram(LHD loader) is mainly used to shovel and load and transport the ore and rock after blasting in the mine. Electric scooptram(LHD loader) can also be used in railway, highway and tunnel engineering. The LHD machine is especially suitable for the working face with poor working conditions, narrow, low and muddy working site.
The power system of WJD-0.6 underground electric LHD is driven by AC 380V and 30kW motors. Hydraulically controlled variable displacement pump - quantitative motor - transmission gearbox - front and rear axle - four rubber wheel transmission. The swing bearing is used to connect the rear frame swing. The cable winding system of electric scooptram adopts hydraulic control operation, and the pressure of cable receiving and releasing is stable. Use special cables for scooptram.
The working system of LHD loader adopts pilot hydraulic control operation, which makes the operation of the scraper more simple, efficient and low failure rate. The emergency parking brake of scooptram adopts friction pad brake, spring brake, hydraulic pressure to release the brake, and sudden power failure to brake immediately, which is safe and reliable.
① The design is reasonable, small and exquisite, and the section at the operation site is not less than 1.6 * 2m, which can be unblocked;
② Strong electric power, zero pollution, low energy consumption, and greatly improve work efficiency;
③ The cable winding system adopts hydraulic control operation, and the automatic retraction and retraction of the cable is synchronized with the backward and forward of the vehicle;
④ Front and rear axle 4-wheel drive, strong power and strong climbing ability;
WJD-0.6 | ||
Bucket capacity (m³) | 0.6 | |
Rated load capacity (t) | 1.2 | |
Climbing capacity (heavy load) (°) | ≥25 | |
Maximum traction force (kN) | ≥45 | |
Maximum scooping force (kN) | ≥38 | |
Maximum steering angle (°) | ±38 | |
Corresponding unloading angle (°) | 45 | |
Swing angle (°) | ±8 | |
Minimum ground clearance (mm) | 220 | |
Maximum lifting height (mm) | 2400±100 | |
Maximum unloading height (mm) | 1080±50 | |
Minimum unloading distance (mm) | 660 | |
Wheelbase (mm) | 1850 | |
Minimum turning radius (mm) | outside of bucket | 4000 |
inside of rear wheel | 2400 | |
Walking speed (km/h) | 0-8.0 | |
overall length (mm) | 4850±100 | |
overall width (mm) | 1110±50 | |
overall height (mm) | 1760±50 | |
Action time of working device (s) | <14 | |
Departure angle (°) | 15 | |
Overall weight (t) | ≤4.2 | |
Tyre model | 7.50-15 | |
Volume of traveling oil tank (L) | 110 | |
Rated power | 30kW |
China, factory, supplier, manufacturer, cheap, price, exporter, Chinese.
Rock mining | Coal mining | Mining technology | Underground mining machine | Mining shaft | Underground ming loader | Lhd loader | Dumping truck | Tunnel loader | Tunnel mucking loader | Tunnel mucking machine | Articulated dump truck | Tricycle dumper | Rock drilling machine | Underground drill rig | Road header machine | Tunneling machine | TBM machine | Shield machine | Electric digger | Concrete mixer pump
Sinosun Technology Group Co.,Ltd.
Address : Yuncheng Industry Zone, Heze City, Shandong Province, China
Tel : +86 530 6531227
Cellphone : +86-13561392361
Welcome to send your message to us